MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt
Voc and will automatically detect and charge your 12, 24, or 48V battery bank
with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for
different battery chemistries, like lead-acid, lithium and others.
Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured
over Bluetooth via the VictronConnect App. This allows device set-up,
management, and at-a-glance information, such as battery voltage and current,
PV voltage and current, and historical data.
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for
communication with additional VE.Can SmartSolar chargers. The additional units
are simply “daisy chained” to each other with a single RJ45 cable between the
individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will
synchronise their charge stages. They can also send their data, via a single
cable, to a GX monitoring device.
Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management
Portal provides access to the full power of your solar charger(s).
For remote installations - even when there is no internet connection nearby -
you may be able to monitor your MPPT by connecting the GlobalLink 520.
SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our
other MPPT solar chargers. This port can be for single unit monitoring or for
streetlight control. The remote on/off connector can be externally controlled
by a third-party device like a lithium battery. An optional plug-in LCD
display/control provides live-data, set-up and management, straight from the
face of the device.
