|
❖Features
Hawk RV Instantaneous LP Gas Water Heater - Black Door
Water Heating Capacity: 8L/Min
The water heater is simple and convenient to operate. The microcomputer
intelligent control system controls the whole process of the water heater.
Press the key to start the water heater and set the required temperature.
After the microcomputer intelligent control system detects the qualified water
flow, it starts the ignition device. After that, the gas valve is turned on to
light the gas burner, and then the user can enjoy a steady stream of constant
temperature hot water. The microcomputer automatically detects the entire
process, safely and reliably. In case of failure, the microcomputer system
will automatically shut down the gas to prevent accidents. The water heater is
a forced exhaust system. After the water heater is turned on, the air outside
will pass through the air intake grill, enter the combustion chamber after the
dust-proof net, and the flue gas or air mixture is discharged outdoors.
1. Digital constant temperature system: microcomputer control system,
which constitutes the "computer" of the whole heater, controls the water,
electricity, and gas of the water heater in a coordinated manner, and controls
the output water temperature to the selected temperature.
-
Low water pressure startup: Low water pressure at startup and it will be easier to use.
3. Flameout protection: When the water heater accidentally flames out
during use, it can automatically cut off the gas to ensure that the gas will
not leak.
4. Speed changing and wind resistance function: When there is a blockage
of the flue or the exhaust is blocked, the built-in microcomputer system will
increase the running speed of the fan and eliminate the generation of harmful
gases. When the speed reaches the predetermined maximum speed, the
microcomputer system will issue the cease-gas and cease-fire instruction to
effectively safeguard the heater and occupants.
5. Water and gas linkage control: When the water supply is interrupted or
the water outlet valve is closed, the water heater will automatically stop the
combustion and shut down.
6. Outlet water temperature display: with outlet water temperature
display.
7. Frost protection function: When the temperature of the water pipe in
the water heater is lower than 6±1℃ (43°F±2°F), the line controller will
display “Fd” character, the machine will start ignition and run with a certain
load, the water heater will automatically shut down after the whole machine
runs for 5 seconds. When the water temperature in the working water heater
reaches 32±1℃ (90°F±2°F), it will shut down automatically.
- After shutdown, wait for 3 minutes for self-testing. When the temperature is lower than 6±1℃ (43°F±2°F) or antifreeze thermostat control stops working, it will start to run again.
- In the process of starting the antifreeze function, when a fault occurs, the corresponding fault is reported and the corresponding code is displayed. After 15 minutes, the system automatically clears the fault code. If the antifreeze start condition is still met, the antifreeze will automatically start again.
8. Fault auto-diagnosis and fault code display function: The intelligent
microcomputer can inreal-time monitor various safety devices; gas proportional
valves and other components; find faults and if necessary, safely shutdown.
Advanced fault code display function, is easy to use and maintain.
|
❖Specifications
Brand | Hawk
Model | FS08B1(50)
Gas Intended for | Universal LPG
Total Nominal Gas Consumption | 58MJ/h
Number of Injector | 8
Injector Size | 0.91mm
Max. Working Water Pressure | 0.8MPa
Min. Working Water Pressure | 0.1MPa
Nominal Test Point Pressure | 2.75kPa
Nominal Manifold Pressure | 1.28kPa
Electrical Power | 12VDC, <10 amp
Water Heating Capacity | 8L/min (Temp Rise 25K)
Maximum Water Temp. | 49°C
Heat Output | 16kW
Shipping Dimentions(mm) | 420 x 420 x 430
Shipping Weight | 13.7kg
Manufacturers Warranty | 1 year
Free Shipping