|
❖Features
Smart Phone Monitoring System
The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring
Technology. By downloading the Android™ or Apple® app to your smartphone or
tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that
can monitor and optimise each Prismatic cell within the battery during normal
operation. It will protect the battery pack from over charge, over discharge,
over temperature & short circuit. The BMS helps to ensure safe and accurate
operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
- 100Ah Lithium = 160Ah AGM
- 125Ah Lithium = 200Ah AGM
- 200Ah Lithium G2 = 320Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The Enerdrive B-TEC G2 battery provides 60% more usable power than its
equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes
for a superior alternative.
The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s
(AUX battery), caravans, small water craft, low power communication sites or
any other application that requires the use of a single deep cycle battery
that meets the amp hour capacity.
|
❖Specifications
Brand | Enerdrive
Model | EPL-200BT-12V-G2
Nominal Voltage | 12.8V
Nominal Capacity | 200Ah
Cycle Life (DOD – 80% under controlled conditions) | ≥ 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature | 0 ̴ 45°C
Normal Charge Voltage CV/CC* | 14.20 ̴ 14.60V
Standby (Float) Voltage | 13.50 ̴ 13.80V
Maximum Charge Current | 150A @ 25°C for 30mins
Recommended Charge Current | 40~100A
For Maximum Life, Charge in the lower amperage range
Standard Discharge Specification
Battery Discharge Temperature | -20 ̴ 60°C
Battery Output Voltage Range | 11.00 ̴ 14.60V
Maximum Discharge/Pulse Current | 200A @ 25˚C ±5˚C for 30 mins
Pulse Discharge Current | 450A for 1.0s
Discharge Cut-off Voltage | ≤11.20V
Circuit Protection | The battery is supplied with a LiFePO4 Battery Management
System BMS that can monitor and optimize each single prismatic cell during
charge & discharge, to protect the battery pack from overcharge, over
discharge & short circuit. Overall, the BMS helps to ensure safe and accurate
operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell | 3.90V ± 0.03V
Over-charge Release Per Cell | 3.60V ± 0.05V
Over-charge Release Method | Discharge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell | 2.80V ± 0.05V
Over-discharge Release Per Cell | 3.20V ± 0.05V
Over-discharge Release Method | Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button | Yes
Over Current Protection
Discharge Over Current | 220A for 30s – 450A for 1s
Protection Reset Time | Approx 10s Auto Release
Over Current Release Method | Disconnect Load
Over Temperature Protection
Battery Discharge Over Temperature | Protection to 65°C ± 5°C
| Release at 50°C ± 5°C
Battery Charge Over Temperature | Protection to 55°C ± 5°C
| Release at 45°C ± 5°C
Short Circuit Protection | Auto release after 5s
Dimensions
Length | 505mm
Width | 172.5mm
Height | 265mm
Weight | Approx 25.0 Kg
Storage Information
Temperature & Humidity Range | ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH
| ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH
Self-discharge Rate | ≤ 3% Per Month
Free Shipping