|
❖Features
CEL-FI GO TELSTRA MP
Telstra smart signal repeater
Locked to Telstra Network
IMPROVE YOUR MOBILE COVERAGE ON THE MOVE
CEL-FI GO is a 3G/4G mobile signal amplifier that provides up to 70dB of
signal gain - 30x more powerful than a standard antenna/cradle set-up. All the
while unconditionally protecting the mobile network.
This kit features the 126cm Blackhawk 7-10dBi antenna.
Ideal for Marine applications.
Provides Coverage For Automotive Applications
Simply install CEL-FI GO inside your vehicle and enjoy having great 3G/4G
mobile reception. No longer will you need to stop or drive to a particular
spot to be able to make and receive phone calls. Your CEL-FI GO can be
configured to improve the mobile coverage for all types of vehicles from cars
to trucks, to farm machinery and caravans, all with only a change in antenna.
IncreasesMobile Data Speeds
Slow internet speeds on your mobile device are often caused by low signal. If
you suffer from low signal on the go, you will be able to relate to the
frustration of trying to access email or the internet. Cel-Fi GO will amplify
the available LTE or HSPA mobile signal and increase your data speeds
dramatically. Email, internet, video and social networking speeds can achieve
up to 4x improvement. Note: The 4G/LTE bands can only be utilised for data
(not calls) unless both the smart phone and the local network support Voice
over LTE (VoLTE).
Extends Mobile Phone Battery Life
Mobile phones use a lot more energy when in poor signal areas. The phone
adjusts its output power to compensate in an attempt to boost the poor signal.
As a result the phone will consume a lot more battery power. Using Cel-Fi GO,
your indoor mobile signal should be high and the battery will last noticeably
longer for you to work and talk while on the move.
Improves Voice Quality
The quality of a voice call is usually determined by the phone’s signal
strength and nearby interference. With improved signal strength inside your
vehicle, Cel-Fi GO mobile version will provide crystal clear voice quality for
your cell phones.
CEL-FI GO FEATURES
- The mobile solution approved by Telstra and meeting ACMA regulations.
- Amplifies and disburses a 3G (HSPA) or 4G (LTE) Telstra mobile signal. Note: Cel-Fi GO will only boost one frequency band at a time.
- Provides manual selection of 3G or 4G or utilise the auto band selection. Band selection is via a button on top of the unit or using the WAVE App.
- Once installed, Cel-Fi GO has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to 70 dB.
- Provides mobile coverage in and around the vehicle/area.
- Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments.
- Network-Safe protection that monitors mobile base stations in real time to ensure no interference with the normal function of the mobile network.
- Cel-Fi GO supports Bluetooth Connectivity or Micro USB connection to Nextivity’s Smartphone or PC WAVE App.
- Intuitive WAVE App allows quick and easy installation by a trained technician.
Includes:
• CEL-FI GO Repeater
• Blackhawk ANT-BH-OM-201 Antenna
• Adjustable Angle Bracket
• CEL-FI Internal Antenna Kit
• 1 x 10m Cable
• 240V/12 Volt Power Supply
|
❖Specifications
Brand | CEL-FI
Model | Cel-Fi GO Telstra MP
Cellular Bands | 3G 850 & 4G 700/1800MHZ
(one frequency band at a time)
System Gain | Up to 70dB
Dimensions | 28mm (H) 87mm (W) 255mm (L)
Weight | 600g
Environment | Operating Temperature: 0° to 65°
Storage Temperature: -25° to 65°
Relative Humidity: 0 to 95%, noncondensing
Power | 12VDC via external supply OR cigarette socket
External Supply: 100 to 240 VAC, 47 - 63Hz
Power consumption less than 15W per unit
Antenna Requirements | SMA Female Outdoor Antenna Connector (50 Ω)
SMA Female Indoor Antenna Connector (50 Ω)
Approved antenna aresupplied with the units
Warranty | CEL-FI GO is covered by a 24 month manufacturer warranty
Installation | Your CEL-FI GO is approved if installed correctly
Only qualified resellers who have undertaken
product training should perform installation of
CEL-FI GO
Mobile version CEL-FI GO’s require you to take into
account the vehicles safety mechanisms such as
airbags, ABS, Traction Control, Stability Control and
Auto Electrics. Incorrect installation may result in
water leaks, electrical failure, battery damage, fusing
of internal wiring and cables or risk of FIRE.
Misuse of this equipment could result in injury and
equipment damage.
Shipping Weight | 3.65kg
Shipping Dimensions(mm) | 250 x 170 x 1350
Free Shipping