Victron 24V 13A Blue Smart IP65 24/13 AU/NZ Battery Charger
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart
Reconditioning
A lead-acid battery that has been insufficiently charged or has been left
discharged during days or weeks will deteriorate due to sulfation. If caught
in time, sulfation can sometimes be partially reversed by charging the battery
with low current up to a higher voltage.
Recovery function for fully discharged batteries
Most reverse polarity protected chargers will not recognize, and therefore not
recharge a battery which has been discharged to zero or nearly zero Volts. The
Blue Smart IP65 Charger however will attempt to recharge a fully discharged
battery with low current and resume normal charging once sufficient voltage
has developed across the battery terminals.
The VictronConnect app
Setup, readout and configure your Blue Smart IP65 Charger via your smartphone.
You can display the status of your charger and battery and even control the
functions of your charger using the VictronConnect app. On your screen the
readout of voltage and current is default available.
Storage mode: less corrosion of the positive plates
Even the lower float charge voltage that follows the absorption period will
cause grid corrosion. It is therefore essential to reduce the charge voltage
even further when the battery remains connected to the charger during more
than 48 hours.
Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with
temperature. The Blue Smart IP65 Charger measures ambient temperature during
the test phase and compensates for temperature during the charge process. The
temperature is measured again when the charger is in low current mode during
float or storage. Special settings for a cold or hot environment are therefore
not needed.
Li-ion battery mode
The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion
(LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Versatile Charging Solutions for All Vehicles
Whether you're maintaining a car, boat, or RV, the Blue Smart IP65 Charger
delivers reliable performance for all lead-acid and lithium-ion batteries. Its
adaptive features make it an ideal choice for a wide range of automotive
applications including storage and trickle charging.
Perfect for Outdoor Enthusiasts and Professionals
Designed for users who demand the best in battery care, this charger is well-
suited for marine, automotive, and off-grid applications, ensuring peak
battery performance in all conditions.
Ultra high efficiency “green” battery charger
With up to 95% efficiency, these chargers generate up to four times less heat
when compared to the industry standard. And once the battery is fully charged,
power consumption reduces to 0.5 Watt, some five to ten times better than the
industry standard.
Durable, safe and silent
Low thermal stress on the electronic components. Protection against ingress of
dust, water and chemicals. Protection against overheating: the output current
will reduce as temperature increases up to 60°C, but the charger will not
fail. The chargers are totally silent: no cooling fan or any other moving
parts.
