Enerdrive B-TEC 200Ah Slim Metal Case Lithium/LiFePO4 Battery
The new 200Ah ePOWER B-TEC Slimline lithium battery is designed and intended
for use in deep cycle applications where a single battery is required that
meets the amp hour capacity.
- Extremely compact size W 530 x H 600 x D 83 mm. All connection points for the battery are at one end including all Comms Ports and Reset Port.
- Reset button is not included on the battery itself, we have opted for a button that can be remotely mounted elsewhere in the install. This allows for a much easier restart process for customers and also keeps the battery more water tight with less chance of water ingress.
- Comms Ports are both RJ45 remote ports with CAN output. Both are reserved for future integration and functionality.
- Water resistant metal casing meeting IP52 rating and all external bolts and fittings are blind so limits the chance for water to travel from external to internal. Rubber style seals between all metal framing. Frames overlap as well to help avoid water ingress.
*Smart Phone Monitoring System: *The Enerdrive Enerdrive B-TEC Slimline
battery incorporates wireless Battery Monitoring Technology. By downloading
the Android™ or Apple® app to your smartphone or tablet device, you can
monitor the following information; Battery Capacity; Battery Voltage; Battery
Current (Amps); Battery State of Charge (SOC); Battery State of Health (SOH);
Battery Status; Individual Cell Voltage; Battery Temperature; Battery Cycles;
Battery Alarms & Battery Event Information.
Battery Management System : The battery is also equipped with an internal
Battery Management System that can monitor and optimise each Prismatic cell
within the battery during normal operation. It will protect the battery pack
from over charge, over discharge, over temperature & short circuit. The BMS
helps to ensure safe and accurate operation of the battery.
Size & Weight Savings: Lithium v AGM Capacities; 200Ah Lithium = 320Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The 200Ah Slimline battery is able to accept a maximum inverter capacity of
3000W only. Exceeding the maximum inverter capacity can damage the BMS
Management within the battery.
If you are requiring a battery system larger than Enerdrive B-TEC battery,
please look at the Enerdrive Pro Series Power Pack Systems which can offer
multiple parallel and series connections with Active Cell Balancing Protection
across the entire pack.
Please note B-TEC batteries must not be installed –
- In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual.
- In wet areas such as caravan chassis mounts, open ute trays or boat deck areas.
- Inside compartments dedicated to carrying gas.
This product is not suitable to mount anywhere with a possibility of being
exposed to the elements. It is an electronic product designed for internal use
ONLY.
